Land, planning & reports
Boundaries, layouts, DPRs and feasibility reports built on measured ground.
DGPS / RTK, total station, drone LiDAR and hydrographic surveys, GIS and planning support for highways, rivers, townships and land, delivered as engineering-ready data across North India.
Talk to a survey expert: +91 90440 86207
Seventeen services across five disciplines, all tied to the same control and datum, so land, aerial and underwater data fit together.
Boundaries, layouts, DPRs and feasibility reports built on measured ground.
DGPS / RTK control, total station detail and levels for design.
Aerial mapping, point clouds, volumes and GIS databases.
Bathymetry, river sections and capacity of ponds, dams and reservoirs.
Highways, railways, pipelines, power lines, traffic and buried utilities.
Not sure which survey you need? Choose what you are planning and our survey planner shows the right survey and deliverables.
Open survey plannerOver 85% of our clients come back for their next project. These are the reasons they give us.
Leica, Trimble and Sokkia instruments calibrated every year at authorised centres; echo sounders bar-checked before each session.
30+ professionals: senior surveyors, DGCA-certified drone pilots, hydrographic surveyors and GIS specialists.
Projects start from GNSS control and TBMs, with the datum and UTM zone written on every drawing.
Aerial, ground and underwater data from one team, merged on one datum.
Drawings, surfaces and sections in the formats designers use: DWG, DTM, XYZ, KML and GeoTIFF.
Every report states the method, the control used and the accuracy achieved, checked against independent points.
GNSS, total stations, levels, multi-rotor and fixed-wing drones, LiDAR, echo sounders and GPR, processed on licensed software.
Leica GS16, Trimble R8s
Static control, RTK detail survey, TBMs and alignments
Leica TS06, Sokkia CX-105
Traverses, detail survey, sections and setting-out
Sokkia B40A, Leica NA730
Precise levelling, L-sections and TBM transfer
DJI Matrice 350 RTK, Matrice 300, Phantom 4 RTK; senseFly eBee X fixed-wing
Orthomosaics, DSM / DTM, contours and volumes
DJI Zenmuse L2 drone LiDAR; handheld LiDAR scanner
True ground under vegetation, corridors and structures
Seafloor HydroLite-TM single-beam echo sounders (~200 kHz)
Bathymetry, river sections and storage capacity
MALA / GSSI multi-frequency systems
Buried pipes, cables and voids before excavation
AutoCAD Civil 3D, ArcGIS Pro, Global Mapper, Pix4D, Agisoft Metashape, DJI Terra, LiDAR360, Leica Geo Office, Hypack
Surfaces, sections, maps and geodatabases
From national highways and reservoirs to township layouts and petrol pump sites.
Strip topography, alignment, cross-sections, control and traffic counts for new roads, widening and DPRs.
Track and corridor surveys, levels and sections, and engineering surveys for over-bridges and under-bridges.
Reservoir capacity, canal and pond surveys, pipelines and inland waterways.
River cross-sections, bridge-site surveys and flood-plain mapping for design and flood studies.
Base maps, township mapping, layouts, plotting and setting-out for developers and authorities.
Route alignment and corridor mapping for transmission lines, and site and corridor surveys for telecom.
Periodic stockpile and pit volumes, boundary demarcation and plans for statutory submission.
Revenue and cadastral surveys, land acquisition and record digitisation for departments and district administrations.
Forest boundary demarcation and mapping support for environmental studies.
Topography and utilities for plants, solar sites and retail fuel outlets.
Real projects, with the scope, the technology used and what the client received.
Survey data used for hydraulic modelling by IIT Roorkee.
Delivered in 45 days against a 60-day target; ± 3 cm horizontal and ± 2 cm vertical achieved against a ± 5 / ± 3 cm specification.
Mapped in 5 working days; 2.5 cm/pixel orthomosaic and 0.5 m contours at ± 3 cm vertical, used for master planning, drainage design and approvals.
Every project follows the same documented process, so you know what happens next and what you will receive.
Tell us the site, purpose and deadline. We confirm the survey type, accuracy and deliverables, and send a unit-rate quotation.
→ Scope and quotationWe study maps, KML and records, and check access, drone airspace zone, water conditions and permissions before mobilising.
→ Site risks and access planControl layout, datum and projection, flight plans, survey lines and the field crew are fixed in a written plan.
→ Survey plan and scheduleDGPS control and TBMs first, then total station, drone, LiDAR, echo sounder or GPR work, with daily field checks.
→ Raw data and field notesData is processed in AutoCAD Civil 3D, Pix4D, DJI Terra, LiDAR360, Global Mapper or Hypack into surfaces, sections and maps.
→ Surfaces, sections and mapsIndependent review: traverse and TBM loop closures, check-point comparison and drawing checks against the specification.
→ Accuracy statementDWG, PDF, KML, DTM and XYZ files with a report stating datum, method and achieved accuracy, handed over and explained.
→ Drawings, data and report“We truly appreciate the precision, professionalism, and in-depth expertise your team brings to every project.”
“Great work 👍, working process very professional, and very fast.”
“Good job for our company NCC LTD.”
“This is the good consultancy. All person is a good 👍 …”
“Great project complication timing and quality work organization.”
“Team work and good leadership quality.”
Short, practical articles to help you plan the right survey.
What to check before buying land in Uttar Pradesh: Khasra and Khatauni, village map, boundary demarcation, area units, access road and flood risk.
Read articleHow drone LiDAR and drone photogrammetry differ, where each works best, what you receive, and how DGCA airspace zones affect a drone survey.
Read articleWhat a bathymetric survey measures, how echo sounders and GNSS are used, how pond and reservoir capacity is calculated, and what reports you receive.
Read articleBy units: per hectare or acre for land and drone surveys, per km for corridors and GNSS control, per cross-section for rivers, per pillar for demarcation, plus mobilisation and the report. GST at 18% is added. You get the full breakup before work starts.
Usually an AutoCAD drawing (DWG), PDF plans and report, and KML / KMZ to view in Google Earth. Drone and LiDAR jobs also include orthomosaic, DSM / DTM and point cloud (XYZ / LAS). The exact list is written in your quotation.
Yes. We work across India, mostly in the states of North India, and travel to any site the project needs. Mobilisation for distant sites is quoted separately.
Drone flights follow the DGCA Drone Rules. Sites in the green zone of the Digital Sky airspace map can usually be flown without prior permission, while yellow and red zones need approval first. We check your site's zone at the quotation stage.
Control is fixed with DGPS (RTK or static post-processing) and each job is checked against TBMs and check points. The accuracy achieved and the datum used are stated in the report.
A Google Maps pin or lat-long, applicant name, Khasra / Gata number, village and tehsil, plot size, the road name or number and its type (NH, SH, MDR or ODR), the oil company, and a few site photos.
Send the basics and our team will reply with questions or a clear, itemised quotation.
Fields marked * are required.
Our team will contact you on the number you shared. For a faster reply you can also send the same details on WhatsApp.